יחידת אינטרקום וקודק ע"ג IP דו כווני הכוללת מיקרופון ורמקול מובנה, 2 לחצני הפעלה (PTT) לכריזה ל2 אזורים נפרדים, היחידה פועלת על גבי רשת PoE המאפשרת העברת מתח ונתונים באמצעות כבל רשת בודד (Ethernet) ללא ספק חיצוני.
יחידה קומפקטית המתאימה עבור יישומי כריזה, אינטרקום וביטחון.
Universal wall mountable volume/source/zone control with IR receiver for the Barix Extreamer and Annuncicom IP audio distribution devices. The BARIX VSC, a universal volume/source control for use with Barix devices, features a double digit numeric display, selector dial, and IR reception capabilities. It connects to the Exstreamer serial port via standard CAT5 cable through a supplied adapter.
The Barix Annuncicom 1000 is a Versatile, Professional IP Intercom and PA device with eight supervised contact closure inputs, nine relay outputs and balanced stereo audio interfaces, including support for professional microphones on the audio inputs. Dual redundant supervised power supply inputs and redundant network interfaces make the Annuncicom 1000 ideal for very high reliability applications.
The Barix Annuncicom 155 is a ruggedized, universal IP Audio device, developed to operate within challenging environmental conditions whether outside or in rolling stock.
With an amplified output suitable to drive 5W into an overhead paging or panel speaker, a sensitive microphone input, selector/contact closure inputs and control output the device is equally suitable for paging, intercom, help point and monitoring applications.
Professional standards-based desktop IP Intercom and paging master station for use in IP Audio distribution applications
The Barix PS16 is a multifunction, standalone IP intercom and IP PA master station with redundant Ethernet interfaces and PoE support. With 16 buttons, each with individual LED indicators, expandable to 112 buttons, and a 2-line LCD display, the PS16 is a suitable master station for high quality IP Intercom and paging applications without the need for PCs or server software.
Programmable I/O device server with 2 serial ports, 8 digital I/O and Dallas 1-wire support, SNMP, Modbus/TCP and web interfaces via builtin 10/100 Ethernet interface. The Barionet 50 is a fully programmable I/O device server that supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to monitor and control a variety of built-in I/O functions. Four contact closure inputs, four relay outputs, a 1-wire interface and two serial ports can be monitored and controlled via several built-in protocols. In additoin, all I/O functions and interfaces can be controlled and monitored using custom DHTML web pages and BCL (Barix Control Language) applications loaded into the device.
Programmable I/O device server with 2 serial ports, relay and digital outputs, digital and analog inputs and Dallas 1-wire support., SNMP, Modbus/ TCP and web interfaces via built-in 10/100 Ethernet interface. UL listed
Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A), UL listed, DIN Rail mountable The Barix R6 is a UL-listed Modbus I/O module with a serial RS-485 Modbus/RTU interface. Six high-current relays, capable of switching up to 16 amps at 230VAC allow switching of line voltage devices. The R6 can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/ RTU message protocol
Modbus remote I/O module with RS485 Modbus/ RTU interface, 8 universal (analog or digital) TTL level inputs or outputs. Suitable also as a Wiegand converter or 1-wire temperature sensor interface to Modbus/RTU. The Barix X8 is a universal Modbus I/O module with serial RS-485 Modbus/RTU interface. Eight universal inputs or outputs can be independently programmed to act as digital or analog inputs with a programmable pull-up resistor, or as digital outputs. The X8 can be used to interface to I/O, wiegand enabled readers/keypads or Dallas 1-wire temperature sensors. It can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.
Modbus remote I/O module with RS485 Modbus/ RTU interface, 12 current sourcing outputs and 12 optically-isolated inputs. The Barix IO12 is a Modbus digital I/O module with a standard RS-485 Modbus/RTU interface. It provides 12 current sourcing outputs and 12 optically- isolated inputs that can be addressed using standard Modbus/RTU commands. The IO12 can be used as a general-purpose Modbus I/O device or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.