The second incarnation of our essential equipment for the sound and audio installation engineer, the dBbox2 allows monitoring, metering and generation of analogue, AES/EBU and SPDIF audio from a pocket sized box.
The dBbox2 includes a simple five key menu interface to make any test as simple as possible.
The case has been formed using our own purpose designed aluminium extrusion then machined and painted to give the unit it's very individual look.
What you can do with the dBbox2:
Monitor mono or stereo line level analogue inputs using the built in speaker or 1/4 inch or 3.5mm headphones. Meter using either PPM or VU scale.
Monitor microphone level analogue inputs, with or without 48v phantom power, using the built in speaker or headphones. Meter using either PPM or VU meter scale.
Monitor AES/EBU balanced or unbalanced inputs using the built in speaker or headphones. Meter using -18dBFS, -20dBFS, PPM or VU scale.
Analyse sample rate, status and data errors.
Generate steady tone, tone sweep, GLITS, EBU, left only, right only, on both analogue and AES/EBU outputs. Tone frequency may be adjusted in third octave steps. Adjust Tone level from +10 to -60dBu in 1dB steps.
Use the built in microphone to talk to analogue or AES/EBU outputs
Generate pink noise and send to left/right/both outputs in both analogue and AES/EBU with a choice of levels in 1dB steps from +10dBu to -60dBu.
Use the built in microphone to talk to AES outputs with a choice of levels and with a built in limiter.
Send an external mic to analogue and AES outputs with gain adjust and phantom power.
Phantom power test with voltage read out. Also useful for checking 2 wire talkback power and channel.
MIDI receiver identifying channel, note on/off and note number.
עכשיו במחיר היכרות 2950 ש"ח כולל מע"מ