סדרת ממירי אודיו DANTE

All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network.

All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.

• Neutrik EtherCon® Ethernet connection.
• Fully Dante compliant device.
• AES67 compatible.
• Dante Domain Manager compliant.
• Ultra-high quality, wide dynamic range conversion.
• Powered via PoE (Power over Ethernet).

AVN-DIO01 Dante to Analogue XLR Stereo Output

Dante AoIP network to analogue XLR stereo output converter.

• 2 x balanced XLR analogue outputs.

AVN-DIO02 Analogue XLR Stereo Input to Dante®

Analogue XLR stereo input to Dante AoIP network converter.

• 2 x balanced XLR analogue inputs.

AVN-DIO03 Dante® to Headphone Outputs (1/4” & 3.5mm Jacks)
With Volume Control & Limiter

Dante AoIP network-to-headphones convertor

• 1/4-inch and 3.5mm jack analogue headphone outputs.
• Headphones volume control.
• Limiter on/off, threshold control and LED indicator.

AVN-DIO04 Dante® to Analogue Phono Stereo Input & Output

Dante to analogue phono stereo input & output.

• 2 x analogue phono-type inputs.
• 2 x analogue phono-type outputs.

AVN-DIO05 Dante® to Analogue Terminal Block Stereo Input & Output

Dante to analogue terminal block input and output convertor.

• 12 x terminal block connections (balanced stereo inputs and outputs).

AVN-DIO06 Dante® to AES3 XLR Stereo Input & Output

The AVN-DIO06 is a Dante to AES3 digital input and output audio convertor.

• 1 x stereo AES3 XLR input.
• 1 x stereo AES3 XLR output.

AVN-DIO07 Dante® to AES-3id BNC Stereo Input & Output

The AVN-DIO07 is a Dante to AES-3id digital input and output audio convertor.

• 1 x stereo AES-3id BNC input.
• 1 x stereo AES-3id BNC output.

AVN-DIO08 Dante® to AES3 Terminal Block Stereo Input & Output

The AVN-DIO08 is a Dante to AES3 digital input and output audio convertor.

• 6 x terminal block connections (balanced stereo inputs and outputs).

AVN-DIO09 Microphone Input to Dante^®

The AVN-DIO09 is a Microphone input to Dante converter in the Sonifex DIO range of Dante input/output devices with A/D circuitry offering a world-class E.I.N. of 129dB. It features a single high quality mic preamp with balanced XLR input, coarse and fine gain controls, high pass filter, phantom power and a tri-color level LED.

The AVN-DIO09 has coarse and fine mic gain with the coarse gain set using a toggle switch, providing 20dB/50dB of gain, and the fine gain set using a trimmer adjustment tool, or small flat blade screwdriver, adding between 0dB and 36dB of additional gain. An on/off toggle switch turns the high pass filter on or off and when enabled, it acts on frequencies below 125Hz at a rolloff of 6dB/octave.

Phantom power is enabled/disabled via a toggle switch on the front panel and when enabled, a 48V DC supply is provided to power an appropriate microphone. A red LED illuminates to show when phantom is enabled.

A front panel audio level LED helps to set the gain and shows the audio level being sent to the Dante network.

Note: If using a phantom powered microphone, it may be necessary to earth the unit using the rear panel earth tag to eliminate mains hum, depending on the nature of your PoE supply.

• 1 x balanced microphone input on XLR socket with latch lock.
• Single turn pot setting fine mic gain (0dB – 36dB).
• Coarse mic gain switch (+20db/+50dB).
• High pass filter on/off switch.
• Phantom power on/off switch.
• Phantom power LED indicator.
• Level LED indicator.