Modbus remote I/O module with RS485 Modbus/ RTU interface, 8 universal (analog or digital) TTL level inputs or outputs. Suitable also as a Wiegand converter or 1-wire temperature sensor interface to Modbus/RTU. The Barix X8 is a universal Modbus I/O module with serial RS-485 Modbus/RTU interface. Eight universal inputs or outputs can be independently programmed to act as digital or analog inputs with a programmable pull-up resistor, or as digital outputs. The X8 can be used to interface to I/O, wiegand enabled readers/keypads or Dallas 1-wire temperature sensors. It can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.

Modbus remote I/O module with RS485 Modbus/ RTU interface, 12 current sourcing outputs and 12 optically-isolated inputs. The Barix IO12 is a Modbus digital I/O module with a standard RS-485 Modbus/RTU interface. It provides 12 current sourcing outputs and 12 optically- isolated inputs that can be addressed using standard Modbus/RTU commands. The IO12 can be used as a general-purpose Modbus I/O device or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.

Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A), UL listed, DIN Rail mountable The Barix R6 is a UL-listed Modbus I/O module with a serial RS-485 Modbus/RTU interface. Six high-current relays, capable of switching up to 16 amps at 230VAC allow switching of line voltage devices. The R6 can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/ RTU message protocol

Programmable I/O device server with 2 serial ports, relay and digital outputs, digital and analog inputs and Dallas 1-wire support., SNMP, Modbus/ TCP and web interfaces via built-in 10/100 Ethernet interface. UL listed

Programmable I/O device server with 2 serial ports, 8 digital I/O and Dallas 1-wire support, SNMP, Modbus/TCP and web interfaces via builtin 10/100 Ethernet interface. The Barionet 50 is a fully programmable I/O device server that supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to monitor and control a variety of built-in I/O functions. Four contact closure inputs, four relay outputs, a 1-wire interface and two serial ports can be monitored and controlled via several built-in protocols. In additoin, all I/O functions and interfaces can be controlled and monitored using custom DHTML web pages and BCL (Barix Control Language) applications loaded into the device.