מקודד אודיו מאוזן בעל כניסות ויציאות אנלוגיות ודיגיטליות, GPIO, מזהה שקט מובנה, התרעות, מגוון קידודים.
- תמיכה ב PCM, Mpeg 1, Mpeg 2, Mpeg LayerIII, אפשרות הרחבה ל:APTX, AACLC, AACLD, AACHE
- צג LCD לבקרה
- אפשרות קנפוג המכשיר ללא מחשב (בעזרת הKEYPAD המובנה)
- ממשקי IP, X21 (סיפרנת), אפשרות הרחבה ל ISDN
ממשק שליטה ובקרה מרחוק דרך BROWSER כולל חווי מלא של המכשיר, אזעקות, היסטוריית אזעקות, סטטיסטיקות רשת (PACKET LOSS, JITTER....)
המכשיר האולטימטיבי להעברת אודיו ע"ג IP
:FEATURES
·
ProntoNet
offers fully TCP/UDP/IP connectivity
via an Ethernet port.
·
IP Multicast, Unicast and Multi-Unicast (optional) audio
streamingtransmission/reception.
·
IP Compatibility: SIP/SAP/SDP/RTP/STUN
protocols are supported according to the standard defined by the N/ACIP project
within the EBU group.
·
Prodys NAT Traversal Streaming Protocol permits router firewall pass-through with zero configuration.
·
FEC (Forward Error Correction). Up to 24 different schemes are available, to fit to the desired
delay and available bandwidth.
·
Error Concealment mechanisms on Mpeg audio modes are
supported to reduce the impact of packet losses.
·
SolidStream by Prodys enables transmission of
STL-grade audio quality over inexpensive IP links such as xDSL connections.
·
Prodys Real time Network Analyzer to monitor critical network parameters in real time during the
connection.
·
Streaming advance features:
- Automatic
Jitter buffer. This adjustable
buffer avoids audio dropouts compensating for up to 10 seconds of jitter in the
IP connection.
- Automatic
synchronization adjustment with the transmitter site rate, to give a constant delay in IP communications.
- User
configurable frame size, to give full
flexibility when adjusting the delay and bandwidth use.
- Test
tools to check the bandwidth, delay and jitter in the IP connection. This information can be used to adjust the streaming
parameters and so, to obtain the best-quality in the real-time audio reception.
·
X.21 interface for transmission/reception over leased lines.
·
Automatic detection of the encoding mode used by the remote unit.
·
Independent encoding/decoding operation.
·
Auxiliary data along with the encoded
audio through two user configurable RS232 ports from 300 to 115200 bps.
·
The Ethernet port is used for audio transmission and control. The unit can be controlled locally from its front
panel, or remotely from its Web Page or from ProdysControl.
·
Local or remotely (TCP/IP) upgrading of one or several units at
once using the same utility. Factory software upgrades can be downloaded.
·
Call
facilities: Auto-redial, call scheduler and log systems.
·
N+k Prodys Redundancy Protocol allows K backup IP codecs to provide resiliency for up to N active
IP codecs.
·
User Access Control to define different
access restrictions in a per user basis.
·
Configuration presets to define different
configurations for all or some specific parameters.
·
BackUp Audio File: Fail-over solution that
switches audio output to playlist from a USB memory stick.
·
Up to seven user configurable general purpose input-outputs (GPIO). Inputs can be set up to control audio inputs or reset
alarms, and outputs can be configured to monitor line status,
audio synchronization or alarms, among other options.
·
Alarms: Real Time alarms management through SNMP traps, GPO
and e-mails
·
Headphone monitoring of audio
outputs (jack connector) from the front panel, with volume control.
·
Optional:
o
ISDN terminal adaptor with S/T and U interfaces.
o
ISDN Compatibility: Fully compatible with
all major audiocodec manufacturers, supporting the most important bonding
algorithms: J52, Telos and CCS bonding.
o
BackUp System: ISDN as a
secondary link for IP/X21.
o
Streaming over 3G/4G networks via USB modem.
o
Additional LAN Management port to split audio and
control data flows or to enable SolidStream over two different IP links.