יחידת טוקבק DANTE 16 ערוצים

 

The FWD1600 is a Dante enabled four wire box with sixteen four wire inputs and sixteen four wire outputs plus eight assignable IFB inputs. A mix output and a hot microphone output are also available on the network.
The unit includes seven analogue inputs and six analogue outputs on XLR which may be used in conjunction with the four wire box or as Dante breakouts. Operational adjustments are simple using the FWD1600 internal web server.
Power may be PoE, an external 12 volt supply or battery or via the IEC mains inlet.

Each channel has a volume control, a cut switch, a IFB monitor button plus a vox incoming audio present LED indicator.
Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector.
There is an 'all talk' key which can be set to talk to any or all of the four wire outputs. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required. The unit includes two 3:1 and one 2:1 network mixers.

The FWD1600 has a secondary ethernet interface which may be used as a switch output or for network redundancy.
Mains requirement is 110-240VAC 50/60Hz.
Dimensions: 2RU 150mm deep.