מערכת לכריזה על גבי IP מסלולרי טאבלט או מחשב, מתממשקת למערכות BARIX ומאפשרת כריזה לפי אזורים

SilenceMonitor מזהה שקט בזמן שידור אודיו, ושולח התראה קולית מיידית למכשירי פלאפון נבחרים

פורס אודיו סטראופוני עם מגבר עד 40W הזנת חשמל מPOE או מספק

הדור החדש של פורסי אודיו על גבי IP

פורס אודיו (דיקודר) מוגבר שהופך כל רמקול פסיבי לרמקול רשת. מתח על גבי POE

מקודד/פורס אודיו על גבי IP

"פורס" אודיו או "דקודר"....הצד השני של הINSTREAMER100 מאפשר פענוח של אודיו שנשלח ברשת

"פורס" אודיו על גבי IP,יחידה מוגברת POE

"פורס" אודיו על גבי IP

מקודד אודיו סטראופוני למגוון אפליקציות

היבריד לטלפוניה מבוסס IP עם תמיכה בקודאק OPUS

Intercom / Paging device with contact closure inputs, relay outputs, Line and Mic / Speaker support.

Versatile IP Intercom and PA device, with two contact closure inputs and built-in relay.

Programmable I/O device server with 2 serial ports, 8 digital I/O and Dallas 1-wire support, SNMP, Modbus/TCP and web interfaces via builtin 10/100 Ethernet interface. The Barionet 50 is a fully programmable I/O device server that supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to monitor and control a variety of built-in I/O functions. Four contact closure inputs, four relay outputs, a 1-wire interface and two serial ports can be monitored and controlled via several built-in protocols. In additoin, all I/O functions and interfaces can be controlled and monitored using custom DHTML web pages and BCL (Barix Control Language) applications loaded into the device.

Programmable I/O device server with 2 serial ports, relay and digital outputs, digital and analog inputs and Dallas 1-wire support., SNMP, Modbus/ TCP and web interfaces via built-in 10/100 Ethernet interface. UL listed

Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A), UL listed, DIN Rail mountable The Barix R6 is a UL-listed Modbus I/O module with a serial RS-485 Modbus/RTU interface. Six high-current relays, capable of switching up to 16 amps at 230VAC allow switching of line voltage devices. The R6 can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/ RTU message protocol

Modbus remote I/O module with RS485 Modbus/ RTU interface, 8 universal (analog or digital) TTL level inputs or outputs. Suitable also as a Wiegand converter or 1-wire temperature sensor interface to Modbus/RTU. The Barix X8 is a universal Modbus I/O module with serial RS-485 Modbus/RTU interface. Eight universal inputs or outputs can be independently programmed to act as digital or analog inputs with a programmable pull-up resistor, or as digital outputs. The X8 can be used to interface to I/O, wiegand enabled readers/keypads or Dallas 1-wire temperature sensors. It can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.

Modbus remote I/O module with RS485 Modbus/ RTU interface, 12 current sourcing outputs and 12 optically-isolated inputs. The Barix IO12 is a Modbus digital I/O module with a standard RS-485 Modbus/RTU interface. It provides 12 current sourcing outputs and 12 optically- isolated inputs that can be addressed using standard Modbus/RTU commands. The IO12 can be used as a general-purpose Modbus I/O device or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.

קונסולה משולבת מיקרופון לכריזה על גבי IP למערכות BARIX

IP Audio device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speaker or amplifers

יחידת אינטרקום וקודק ע"ג IP דו כווני הכוללת מיקרופון ורמקול מובנה, 2 לחצני הפעלה (PTT) לכריזה ל2 אזורים נפרדים, היחידה פועלת על גבי רשת PoE המאפשרת העברת מתח ונתונים באמצעות כבל רשת בודד (Ethernet) ללא ספק חיצוני. יחידה קומפקטית המתאימה עבור יישומי כריזה, אינטרקום וביטחון.

Universal wall mountable volume/source/zone control with IR receiver for the Barix Extreamer and Annuncicom IP audio distribution devices. The BARIX VSC, a universal volume/source control for use with Barix devices, features a double digit numeric display, selector dial, and IR reception capabilities. It connects to the Exstreamer serial port via standard CAT5 cable through a supplied adapter.

The Barix Annuncicom 1000 is a Versatile, Professional IP Intercom and PA device with eight supervised contact closure inputs, nine relay outputs and balanced stereo audio interfaces, including support for professional microphones on the audio inputs. Dual redundant supervised power supply inputs and redundant network interfaces make the Annuncicom 1000 ideal for very high reliability applications.

Versatile, standards-based IP Intercom and PA device with contact closure inputs and relay ouput, power over Ethernet (PoE) support, and an 8-watt speaker amplifier.

The Barix Annuncicom 155 is a ruggedized, universal IP Audio device, developed to operate within challenging environmental conditions whether outside or in rolling stock. With an amplified output suitable to drive 5W into an overhead paging or panel speaker, a sensitive microphone input, selector/contact closure inputs and control output the device is equally suitable for paging, intercom, help point and monitoring applications.

Versatile IP Intercom and PA device, with two contact closure inputs and built-in relay.

מדף התקנה למכשירי הBARIX

MountingBracket